Cheque Printing Alignment Problem: How to Fix It (Easy Steps)

The name goes above the line, the amount in words runs out of the box, or the date misses the boxes. Cheque printing alignment problems are frustrating, and every wrong print wastes a cheque leaf. Almost every alignment problem comes from one of a few simple causes, and once you know which one it is, the fix takes a couple of minutes.

First, Always Test on Plain Paper

Before touching a real cheque, cut a plain sheet to the exact size of your cheque leaf and print on it. Put the printout on top of a real cheque and hold both against a window or bulb. You will see exactly where each field lands. Fix everything on plain paper, then print on the cheque.

Common Cheque Printing Alignment Problems and Fixes

1. Everything is shifted up, down, left or right

Cause: The whole layout is offset, usually because of printer margins or where the cheque sits in the tray.
Fix: Measure how far the print is off (for example 4 mm too low and 2 mm too far right) and move all fields by that amount in your cheque printing software. Many software let you move all fields together.

2. Only one field is wrong

Cause: That field’s position doesn’t match your bank’s layout. Each bank places the date, Pay line and amount box slightly differently.
Fix: Move only that field. Set up a separate layout for each bank account, and choose the right one before printing.

3. The print is tilted

Cause: The cheque is going into the printer at an angle.
Fix: Push the paper guides gently against both sides of the cheque. Use the manual feed slot, which has a straighter path. Make sure the leaf is torn cleanly along the perforation, with no rough edge.

4. The print moves a little every time

Cause: The cheque is not placed at the same spot each time, or the printer pulls small paper unevenly.
Fix: Always place the cheque in the same spot (centre or one side) and keep the guides fixed. Keep cheque leaves flat. If a printer is still inconsistent, try another tray or read our guide on the best printer for cheque printing.

5. Part of the text is cut off

Cause: The text is too close to the edge, inside the printer’s non-printable margin, or the paper size in the driver is wrong.
Fix: Set a custom paper size equal to your cheque in the printer settings and keep the text a little away from the edges. Reduce the font size if a long payee name is running out.

6. Amount in words runs out of the line

Cause: Large amounts make long words, for example “Rupees Twenty Two Lakh Ten Thousand Nine Hundred Forty Eight Only”.
Fix: Use a slightly smaller font, or let the software continue the words on the second line of the amount field. Check the exact wording with our amount in words converter.

7. The print is on the wrong side or upside down

Cause: The cheque was loaded the wrong way.
Fix: Draw an arrow on a plain sheet, print on it and see which side and direction your printer prints. Load cheques the same way every time.

8. Print was fine yesterday, wrong today

Cause: A different printer, a changed paper size setting or a printer driver update.
Fix: Check that you selected the same printer and paper size. Do one test print on plain paper and adjust if needed.

Set up once, print perfectly every time

In MoneyFlex you move each field (date, name, amount, A/c Payee) to match your cheque and save it. Change font name, size and colour any time. Works in Excel on Windows and Mac with any standard printer.

Download Free Trial (3 Days)

Quick Checklist Before Printing a Cheque

  • Correct printer selected
  • Paper size set to cheque size
  • Right bank layout selected
  • Cheque loaded the right way and guides pressed against it
  • Test print checked against light (when using a new printer or layout)

What to Do with a Wrongly Printed Cheque

Don’t correct it with a pen. Under CTS rules, cheques with corrections are not accepted in clearing (see our CTS-2010 cheque format guide). Write “CANCELLED” across the cheque, keep it for your records and print a new one.

Frequently Asked Questions

Why is my cheque printing in the wrong place?

Usually because the field positions don’t match your bank’s cheque, the printer margins add an offset, or the cheque is not placed at the same spot in the tray each time.

How do I align a cheque for printing?

Print on plain paper cut to cheque size, place it on a real cheque against light, measure how far each field is off and move it in your cheque printing software. Repeat until it matches.

Do different banks need different settings?

Yes. Every bank’s cheque has slightly different field positions, so save a separate layout for each bank.

Wrapping Up

Most cheque printing alignment problems come down to field positions, paper size, or how the cheque enters the printer. Test on plain paper, fix one thing at a time and save a layout for each bank. Then every cheque prints right the first time. New to cheque printing? Start with how to print a cheque from your printer.

Leave a Comment